Monday, November 23, 2020

An Exploration of Parallel Threading on Twelve Shafts

My weaving study group, called ‘Exploring More’ is focused on weaving on more than four shafts.  The topic we have chosen this time is ‘Parallel Threading’ and boy is it ever an exciting subject.   The wonderful thing about parallel threading is that you can weave a huge catalogue of weaving structures as parallel.  Anything from Twill to Summer and Winter to Crackle Weave are good candidates.

Because I am a very practical weaver and I really don’t like to make samples I decided that I would weave two scarves on the same warp but with different wefts and see where it takes me.

I wanted to create a very basic parallel threading and so I started with a simple twill on six shafts. 

I chose six shafts because I have a twelve shaft loom and I wanted to have enough shafts available to host a true duplication.  A good rule of thumb when paralleling a draft is to start with only half as many shafts as your loom weaves. Not a hard and fast rule, but a good starting place.

I began by utilizing my computer program to parallel only the warp.

What PCW Fiberworks did for me was to insert a space between each of the existing warp ends on shafts 1 to 6 and then interleave the same motif onto shafts 7 to 12.  This is not really very exciting but it does show the process rather well.

My next step was to extend the tie up to twelve shafts and then to choose to treadle the weft ‘As Drawn In’.  As Drawn in means that you treadle your weave in exactly the same order as the warp is threaded.

Now that made a big difference and you can see a very pretty diamond pattern emerging.  I really liked this pattern and decided that this would be my jumping off point. 

Never one to weave something simple when I can really go for it; I decided that weaving this pattern as an Echo Weave would be the next step. 

What makes this an Echo Weave is that I’m using a ‘split complementary’ colourway.  This is two colours of the same hue which sit side by side on the colour wheel and then adding the colour in the same hue directly opposite them on the colour wheel, this trio is a split complementary.  Whew, that was a mouth full; what I mean by hue is all three of these colours have the same colour saturation, no mixing pastels and full tones!  I chose to use alternating blue and green in the warp and orange in the weft, yup...orange!  It looks really full on, but what this trio of colours will bring is an optical illusion of a fourth colour, in this case that colour will be purple.

OK now I’ve explained what I thought I’d weave I decided to mess around with the pattern a bit and do a bit of copying and pasting and reversing and cutting...you know all the fun things a computer program does!  

Then I thought.....hmmmmm.....why not see what happens when you mess about with the ‘split complementary’ and use green and orange in the warp and blue as the weft.

This is what I came up with and if you squint a bit you can actually see the fourth colour emerging.
Here is the project on my loom.  I have chosen to use Webs tencel in blue/purple for the weft.  I think it looks exciting and although my photo doesn't show it, there is already wonderful iridescence appearing.

2 comments:

Peg Cherre said...

I LOVE it! Are you using tencel? Silk? Mercerized cotton? Or something with a matte finish?

Peg Cherre said...

I love seeing your process and your final decision on the loom. Are you using Tencel? Silk? Mercerized cotton? Something else with a sheen to highlight the iridescence?