Finishing up the Black Table Runners

I finally started the last of the 2/22 black cottolin runners.  For the last runner the weft is 2/22 purple cottolin.  I also decided to change up the pattern, it is the inverse of the original pattern.  It is now a pattern of diamonds instead of X’s.

It wove up quite quickly and I was able to cut all the runners off and all that is left by the loom is some dust bunnies hiding in plain sight!

I’ve washed and given the runners their first press.  I’ve folded and pinned the hems ready for hand sewing but it has been very foggy lately so I need to wait for some sunshine to finish the runners.  I’ve taken some photos (with the pins in hem).  First runner is 2/22 beige and black cottolin, it is about 67 inches long and 18 inches wide.  The graphic punch of the X’s make for a lovely modern table runner.

The second runner is 2/16 gold ramie and 2/22 black cottolin, it is about 50 inches long and 20 inches wide.  It is the widest runner by 2 inches!  I had to take the photo with the lights on so the colour of the gold ramie isn’t quite right but in real life the colour is stunning.

The third and final runner is 2/22 purple and black cottolin, it is 53 inches long and 18 3/4 inches wide.  The diamonds are just as lovely to the X’s in my humble opinion.

The autumn crackle silk scarf is up on Etsy.  For Sale.

Final Garden Photo is seed heads for the Echinacea purpurea 'Green Twister' with a white crowned sparrow who just loves them.  Don't let the cuteness fool you he also likes to eat my blueberries!

Black Cottolin Table Runners on 8 Shafts

The warp for the table runners is 2/22 black cottolin is 6 yards and 12 inches long.  The plan is to weave 2 runners at about 50 inches and 1 runner at 70 inches.  For the weft of the first runner I used 2/22 cottolin in a beige linen colour and I wove that one to 70 inches with added hems of 4.5 inches.  The second runner is 2/16 gold ramie.

I just finished the gold ramie runner it was woven to 50 inches with added hems of 4.5 inches.  It wasn’t a pleasure to weave, the draw of the ramie in the end feed shuttle was sticky and hard.  Also there was a lot of knots in the cone of ramie so lots of starting and stopping to put in new pirns.  

There is only one runner left to weave, it should be 50 inches but looking at the back beam it feels like there is a lot of warp still left.  I found a lovely blue/green silk with flecks of brown that I thought would look spectacular with the black warp.

I tried it out and it just died against the black.  All the colour was washed away and it just looked grey and blah.  I was really hopeful about this weft, so I actually left it overnight to see if it would look better in the morning sun.  Nope. 

Next I tried a bright red and royal purple both 2/22 cottolin.  They both work but I felt that the red was a little aggressive and I wasn’t sure if it would be all that nice to live with on a dining room table.  So the purple is the winner.  I haven’t started the purple runner yet so no photos.

Someone asked if we leave the trial weft colours in the warp and that becomes waste or do you take them out.  We take them out, the audition weft aren’t even taken off the cones.

Final photos are of another botany walk at a local park, it is surprising how green and lush the forest is looking in early December.  

The walk took us along a stream and ended at the ocean looking over to the snow peaked coastal mountain range on the mainland of British Columbia.

Twill Table Runners on 8 Shafts

After threading the black 2/22 cottolin for the table runners, the next step is to pick the weft for them.  I choose to weave the 70 inch runner first so I wanted to pick a classic colour combination, black and beige.  I had two choices of colours in 2/22 cottolin, a more linen-y beige and a more cotton-y beige.

I went with the linen-y colour, but it looks quite grey in the photo.  I have done this pattern for years, it is an absolute favourite but I still take a photo of the end of the hem and the start of the pattern just to make sure that the other end of the table runner will match!

Surprisingly the picture above is the only photo that I took of the runner!  It wove up quickly and easily.  By the end of the runner I was starting to notice that the left hand side of the warp was getting a little spongy and loose.  I could really see the distortion when I started the new runner.

I unwove the start of the new runner and I added pipe insulation (or pool noodle) to the back of the warp beam.  It allows the warp to even out the tension by allowing the tighter threads to bite into the pipe insulation to give some ease of tension.

It works but the pipe insulation likes to move forward with the warp as you are advancing the warp so I have to get up and push the pipe insulation back into position every time, it is a little annoying.

For the second runner I choose a bright gold 2/16 ramie, ramie is a bast fibre made from a plant in the nettle family.  Again, here is the start of the runner just in case I need to refer back to it to correctly end the runner.

Some of you eagle eyed people may have noticed that I’ve changed my shuttle, the ramie needed to have a different tension in the shuttle than the 2/22 cottolin that I had used for the previous runner.  The ramie is quite stiff and a little sticky so the draw from the shuttle is a bit ‘hard’, it isn’t that nice to weave with but the runner is stunning.  I’m happy that the runner is only going to be 50 inches, though!

This summer we’ve been hearing the call of a pacific tree frog (Pseudacris regilla) also called the pacific chorus frog, in the back garden and last week I found it hiding under some pots by the greenhouse.  It is only about 5 cm long (about 2 inches) super cute and quite noisy!

Taking a 'brake'

I’ve put on a new project, and no, it's not another painted silk warp!  It is a project that will use a different reed. We share the 14-15 dent reed so I decided that it would be a good idea to do something completely different.  There is some black 2/22 cottolin that has just been begging to be made into table runners.  I pulled a warp that is 6 yards and 12 inches long, it should be long enough for one 70 inch runner and two 50 inch runners.  

There was a bit of a disaster when we were pulling on the warp, there was a loud wooden thunk and a metallic twang from a spring.  The brake for the cloth beam broke!  The wire had frayed apart where it had been looped over the eye hook at the top of the picture.  It was Friday afternoon when this happen so we sent an email to Louet to see if we can get a replacement.

We were able to finish pulling on the warp without using the brake, but it was slow going.  We’d pull on some of the warp and then lock the cloth beam with the lever and cog system.  After locking the beam we could pull the warp and the paper separator to tighten the warp threads on the cloth beam.

My Louet Spring I loom is one of the originals from the early 1990’s and on the Louet website everything has changed over to the new Spring II loom so we weren’t sure if they could help.  But thankfully Mom also has a Louet Spring I loom that she got in 2008 and it has a slightly different brake set up than mine.  There is a second eye hook in the brake lever and the wire is not looped together.

My clever Dad was able to find 12 gauge braided wire, it is slightly bigger than the original braided wire and a 1 3/4 closed loop screw that perfectly fit the hole in the brake lever.  The braided wire is looped at each end and is held by crimps.  He had to go out and buy a Swaging tool to properly lock (cold weld) the swage sleeve to the braided wire.  There is a lot of tension on the brake so it needs to be done right.  The brake had been fixed by Sunday morning!  The wire will stretch a bit so some fine tuning will be needed by using the upper eye hook.

I’ve already started to thread the loom, ready for the next project!  Oh, and this morning (Monday) we got an email back from Louet, but we were able to fix it ourselves!

Final Garden Photo is some fall colour featuring the lime green leaves of the Golden Smoke Tree (Cotinus Coggyria 'Golden Sprite') which turns a lovely burgundy colour, the Maiden Grass (Miscanthus sinesis' Morning Light') is just starting to bloom and the bright red of the Red Bells Tree (Enkianthus 'campanulatus') makes it a highlight in the autumn garden.

Twill Diamonds Table Runners

I quickly finished weaving the first table runner with the 5/2 white cotton warp using a beautiful denim blue cottolin weft.  The pattern is a charming 8 shaft twill with large diamonds.  I decided that the grist of the 5/2 cotton was too large to make a nice folded hem so I did hem stitching and will be twisting the fringe.  

For the second runner the weft that I went with is a lovely heathered grey silk.  It has white and brown flecks throughout and also has an uneven grist.  It is a finer grist than the warp so it is subtle but still quite lovely.  Sorry about the poor quality of the photo.

The runners have been washed, the fringes twisted and have had their final pressing.  All that is needed is a nice sunny day so that I can take some final photos and put them on Etsy.  As there is no folded hem, both sides of the runners can be used.

There were two cones of 5/2 cotton in the stash, the second one is a warm cream.  I’m using it to do more table runners and hopefully this set of table runners will go more smoothly.

It has been a cold start to the spring this year but spring is starting to bloom.  The Siberian iris (Iris sibirica, variety unknown) are just about to pop open in the foreground and the mass of bottle brush flowers from the Fothergilla (Fothergilla gardenii 'Mount Airy') are in the background.

Final garden photo is a Geum ‘Tutti Frutti’ with a lovely peach coloured flower.

Try and Try and Try Again

I am still working with the 5/2 white cotton, I’m not going to let it win!  I did a lot of math and according to it I should be able to get a warp of 4 yards off the cone, the width will be a little narrower than I would like but I should have enough to weave two runners.  I pulled the warp and was able to get 272 ends, which sett at 16 epi makes for 17 inches.  I just hope it doesn’t shrink too much when I wash the finished table runners.

I starting weaving using the cream 5/2 cotton and I hate it.  The pattern is M’s and W’s and the 5 thread float looks like a mistake.  I also didn’t really like how the 5/2 bent around the edges, it looked bumpy.

On the computer I tried some different tie up’s and treadling trying to get rid of the five thread float, but with the M’s and W’s threading it was close to impossible.  There were a couple of drafts but I didn’t like them.  So I pulled the warp back and went to another draft.

The pattern is an advancing twill with large diamonds, truly lovely and no more than a three thread float.  I also change the weft to a wonderful blue cottolin.  I am utterly charmed as I am weaving this pattern.

Final garden photo is forget-me-nots (Myosotis sylvatica) it is an early spring flower with very pretty blue and pink flowers.

Four Shaft Place Mats

Finally the cotton and linen place mat warp is off the loom.  I swear it was the slowest weave ever!  I started out with high hopes of doing some serious stash busting and ended up with a weave that I completely lost interest in. 

The idea was to weave some very simple place mats using linen, linen/cotton slub and cottolin warp in neutral beige/browns.  I decided on an eight yard warp to give myself options.  I chose a larger grist of natural cotton for the warp.

I used the spool rack my husband made me  to pull the warp, because the colours and threads were to be random.  I ended up making three separate warps because I wanted less of some colours than others and some of the yarn was minimal. 

Of course each of the warps demanded a different set of lease sticks, so here are the three sets all piled up.  

I used the raddle on the looms castle to do the first basic colour spreading, and it looks a right mess!

Thankfully after all that, the warp pulled on very nicely.

The pattern I used was from A Handweaver’s Pattern Book by Davison called Ribbed Twill.  It is a 4 shaft pattern that has a lovely diagonal with some grouped threads.

It is always so satisfying to see the cloth winding around the cloth beam, knowing you are almost done.

This was one of the messiest warps I’ve done in a long time and there was a lot of vacuuming up to be done.

Here it is off the loom just waiting for me to decide on how to finish it.  Do I wash it in a piece and cut later?  Do I cut it into place mats, then wash?  Do I give a fringed edge with a machined finish?  Do I do a turned edge?  Do I make double across the table place mats or individual ones? Too many questions!

Here is what is keeping me from the loom right now.  We just bought an outdoor pizza oven and we are waiting impatiently for the weather to cooperate so we can try it out.  Apparently it will get up to 500 C and cook a pizza in 1 minute!  There will be wine and cheese when we finally fire her up.